[openib-general] Error loading ib_ipoib module
Mitul Patel
Fri Apr 30 17:40:05 PDT 2004
Here is the dmesg output
On Fri, 2004-04-30 at 19:36, ron minnich wrote:
> send dmesg output.
>
> ron
>
00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
kernel direct mapping tables upto 10100000000 @ 8000-d000
Scanning NUMA topology in Northbridge 24
Node 0 MemBase 0000000000000000 Limit 000000007fffffff
Node 1 MemBase 0000000080000000 Limit 00000000dff70000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000007fffffff
Bootmem setup node 1 0000000080000000-00000000dff70000
found SMP MP-table at 000f6aa0
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 0009b000 reserved twice.
hm, page 0009c000 reserved twice.
setting up node 0 0-7ffff
On node 0 totalpages: 524287
zone(0): 4096 pages.
zone(1): 520191 pages.
zone(2): 0 pages.
setting up node 1 80000-dff70
On node 1 totalpages: 393072
zone(0): 0 pages.
zone(1): 393072 pages.
zone(2): 0 pages.
ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6a20
ACPI: XSDT (v001 PTLTD XSDT 01540.00000) @
0x00000000dff73408
ACPI: FADT (v003 AMD HAMMER 01540.00000) @ 0x00000000dff75d7e
ACPI: SRAT (v001 AMD HAMMER 01540.00000) @ 0x00000000dff75e72
ACPI: MADT (v001 PTLTD APIC 01540.00000) @
0x00000000dff75f3a
ACPI: SPCR (v001 PTLTD $UCRTBL$ 01540.00000) @ 0x00000000dff75fb0
ACPI: DSDT (v001 AMD-K8 AMDACPI 01540.00000) @ 0x0000000000000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: IOAPIC (id[0x03] address[0xe8000000] global_irq_base[0x18])
IOAPIC[1]: Assigned apic_id 3
IOAPIC[1]: apic_id 3, version 17, address 0xe8000000, IRQ 24-27
ACPI: IOAPIC (id[0x04] address[0xe8001000] global_irq_base[0x1c])
IOAPIC[2]: Assigned apic_id 4
IOAPIC[2]: apic_id 4, version 17, address 0xe8001000, IRQ 28-31
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1]
trigger[0x1])
Using ACPI (MADT) for SMP configuration information
Kernel command line: ro root=LABEL=/
Initializing CPU#0
time.c: Detected 1.193182 MHz PIT timer.
time.c: Detected 2004.550 MHz TSC timer.
Console: colour VGA+ 80x25
Calibrating delay loop... 3997.69 BogoMIPS
Memory: 3564948k/3669440k available (1889k kernel code, 0k reserved,
1941k data, 224k init)
Dentry cache hash table entries: 262144 (order: 10, 4194304 bytes)
Inode cache hash table entries: 262144 (order: 10, 4194304 bytes)
Mount cache hash table entries: 256 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 9, 2097152 bytes)
Page-cache hash table entries: 524288 (order: 10, 4194304 bytes)
CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2
way)
CPU: L2 Cache: 1024K (64 bytes/line/8 way)
Machine Check Reporting enabled for CPU#0
POSIX conformance testing by UNIFIX
mtrr: v2.02 (20020716))
CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2
way)
CPU: L2 Cache: 1024K (64 bytes/line/8 way)
CPU0: AMD Opteron(tm) Processor 246 stepping 08
per-CPU timeslice cutoff: 5119.91 usecs.
task migration cache decay timeout: 10 msecs.
Booting processor 1/1 rip 6000 page 000001000443e000
Initializing CPU#1
Calibrating delay loop... 3997.69 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2
way)
CPU: L2 Cache: 1024K (64 bytes/line/8 way)
Machine Check Reporting enabled for CPU#1
CPU1: AMD Opteron(tm) Processor 246 stepping 08
Total of 2 processors activated (7995.39 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23, 3-0, 3-1, 3-2, 3-3, 4-0, 4-1, 4-2, 4-3 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
number of IO-APIC #3 registers: 4.
number of IO-APIC #4 registers: 4.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
.... register #01: 00030011
....... : max redirection entries: 0003
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 00030011
....... : max redirection entries: 0003
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
Detected 12.528 MHz APIC timer.
cpu: 0, clocks: 2004549, slice: 668183
CPU0<T0:2004544,T1:1336352,D:9,S:668183,C:2004549>
cpu: 1, clocks: 2004549, slice: 668183
CPU1<T0:2004544,T1:668176,D:2,S:668183,C:2004549>
checking TSC synchronization across CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Starting migration thread for cpu 0
Starting migration thread for cpu 1
ACPI: Subsystem revision 20030619
PCI: Using configuration type 1
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully
acquired
Parsing all Control
Methods:............................................................
Table [DSDT](id F004) - 297 Objects with 30 Devices 60 Methods 30
Regions
ACPI Namespace successfully loaded at root ffffffff80565080
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode
successful
evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at
0000000000008020 on int 9
evgpeblk-0748 [06] ev_create_gpe_block : GPE 176 to 207 [_GPE] 4 regs
at 00000000000080B0 on int 9
Completing Region/Field/Buffer/Package
initialization:..............................................................
Initialized 30/30 Regions 0/0 Fields 15/15 Buffers 17/17 Packages (305
nodes)
Executing all Device _STA and_INI
methods:...............................
31 Devices found containing: 31 _STA, 0 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11, disabled)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16) Mode:1
Active:1
00:01:00[A] -> 2-16 -> vector 0xa9 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1
Active:1
00:01:00[B] -> 2-17 -> vector 0xb1 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18) Mode:1
Active:1
00:01:00[C] -> 2-18 -> vector 0xb9 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1
Active:1
00:01:00[D] -> 2-19 -> vector 0xc1 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-18 already programmed
IOAPIC[1]: Set PCI routing entry (3-1 -> 0xc9 -> IRQ 25) Mode:1 Active:1
00:02:01[A] -> 3-1 -> vector 0xc9 -> IRQ 25
IOAPIC[1]: Set PCI routing entry (3-2 -> 0xd1 -> IRQ 26) Mode:1 Active:1
00:02:01[B] -> 3-2 -> vector 0xd1 -> IRQ 26
IOAPIC[1]: Set PCI routing entry (3-3 -> 0xd9 -> IRQ 27) Mode:1 Active:1
00:02:01[C] -> 3-3 -> vector 0xd9 -> IRQ 27
IOAPIC[1]: Set PCI routing entry (3-0 -> 0xe1 -> IRQ 24) Mode:1 Active:1
00:02:01[D] -> 3-0 -> vector 0xe1 -> IRQ 24
Pin 3-2 already programmed
Pin 3-3 already programmed
Pin 3-0 already programmed
Pin 3-1 already programmed
Pin 3-3 already programmed
Pin 3-3 already programmed
Pin 3-1 already programmed
IOAPIC[2]: Set PCI routing entry (4-1 -> 0xe9 -> IRQ 29) Mode:1 Active:1
00:03:01[A] -> 4-1 -> vector 0xe9 -> IRQ 29
IOAPIC[2]: Set PCI routing entry (4-2 -> 0x32 -> IRQ 30) Mode:1 Active:1
00:03:01[B] -> 4-2 -> vector 0x32 -> IRQ 30
IOAPIC[2]: Set PCI routing entry (4-3 -> 0x3a -> IRQ 31) Mode:1 Active:1
00:03:01[C] -> 4-3 -> vector 0x3a -> IRQ 31
IOAPIC[2]: Set PCI routing entry (4-0 -> 0x42 -> IRQ 28) Mode:1 Active:1
00:03:01[D] -> 4-0 -> vector 0x42 -> IRQ 28
Pin 4-2 already programmed
Pin 4-3 already programmed
Pin 4-0 already programmed
Pin 4-1 already programmed
Pin 4-3 already programmed
Pin 4-0 already programmed
Pin 4-1 already programmed
Pin 4-2 already programmed
pci_irq-0297 [11] acpi_pci_irq_derive : Unable to derive IRQ for
device 00:07.2
PCI: No IRQ known for interrupt pin D of device 00:07.2 - using IRQ 255
PCI: Using ACPI for IRQ routing
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 3428M
agpgart: no supported devices found.
PCI-DMA: Disabling IOMMU.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 229340
aio_setup: sizeof(struct page) = 104
Hugetlbfs mounted.
Total HugeTLB memory allocated, 0
IA32 emulation $Id: sys_ia32.c,v 1.56 2003/04/10 10:45:37 ak Exp $
initialize_kbd: Keyboard reset failed, no ACK
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
register_serial(): autoconfig failed
register_serial(): autoconfig failed
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD8111: IDE controller at PCI slot 00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD_IDE: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) UDMA100
controller on pci00:07.1
ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio
hda: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63,
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 224k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xffffff000001d000, IRQ 19
usb-ohci.c: usb-01:00.0, Advanced Micro Devices [AMD] AMD-8111 USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xffffff000001f000, IRQ 19
usb-ohci.c: usb-01:00.1, Advanced Micro Devices [AMD] AMD-8111 USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Adding Swap: 1020116k swap-space (priority -1)
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 448 bytes per
conntrack
tg3.c:v2.3 (November 5, 2003)
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit)
10/100/1000BaseT Ethernet 00:50:45:5b:91:12
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit)
10/100/1000BaseT Ethernet 00:50:45:5b:91:13
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
SCSI subsystem driver Revision: 1.00
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ipmi: message handler initialized
ipmi_kcs: SPMI table not found.
ipmi_kcs: No KCS @ port 0x0ca2
ipmi_kcs: Unable to find any KCS interfaces
Mellanox Tavor Device Driver is creating device "InfiniHost0" (bus=04,
devfn=00)
THH kernel module initialized successfully
--
To unsubscribe send an email with subject unsubscribe to openib-general at openib.org.
Please contact moderator at openib.org for questions.
More information about the openib-general mailing list