[openib-general] udapl:al:query_req_cb() !ERROR!: query failed:

• Previous message: [openib-general] Codebase: when's a good time to branch
• Next message: [openib-general] Using TopSpin CM in a VAPI application
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

 I am a chinese student.there are two question: 
    1)I can run ibal and opensm,it shows"subnet up".i can ping port1 from 
por1 on the same computer.when i ping other port in the subnet,the computer 

died. 

    2)i run a server which is waiting on scorce1.ustb.cn,after i start ibal 

and opensm.when i run a client on score2.ustb.cn,it has these error: 
> > > 
> > >  root at score2 dapltest]# ./bw.sh 
> > > Usage: bw.sh [hostname [size [device]]] 
> > > [root at score2 dapltest]# ./bw.sh score1.ustb.cn-ib0 
> > > UAL: _init: Entered UAL Shell Initialization 
> > > cl_open_device: opening device /dev/al 
> > > uvp_get_interface() [ 
> > > mlnx_get_pd_interface() [ 
> > > mlnx_get_pd_interface() ] 
> > > mlnx_get_qp_interface() [ 
> > > mlnx_get_qp_interface() ] 
> > > mlnx_get_cq_interface() [ 
> > > mlnx_get_cq_interface() ] 
> > > mlnx_get_eec_interface() [ 
> > > mlnx_get_eec_interface() ] 
> > > mlnx_get_mrw_interface() [ 
> > > mlnx_get_mrw_interface() ] 
> > > mlnx_get_mcast_interface() [ 
> > > mlnx_get_mcast_interface() ] 
> > > mlnx_get_errh_interface() [ 
> > > mlnx_get_errh_interface() ] 
> > > uvp_get_interface() ] 
> > > mlnx_pre_open_ca() [ 
> > > mlnx_pre_open_ca() ] 
> > > mlnx_post_open_ca() [ 
> > > cl_open_device: opening device /dev/mlx8cd30a0 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 1 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 1 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > mlnx_post_open_ca(): comm 27904 buf_size 48 
> > > mlnx_post_open_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > UAL: _init: Initialization completed successfully 
> > > ------------------------------------- 
> > > PerfCmd.server_name              : score1.ustb.cn-ib0 
> > > PerfCmd.dapl_name                : IbalHca0 
> > > PerfCmd.mode                     : POLLING 
> > > PerfCmd.num_iterations           : 1024 
> > > PerfCmd.pipeline_len             : 16 
> > > PerfCmd.op.transfer_type         : RDMA_WRITE 
> > > PerfCmd.op.num_segs              : 1 
> > > PerfCmd.op.seg_size              : 65536 
> > > DT_cs_Client: Starting Test ... 
> > > Server Name: score1.ustb.cn-ib0 
> > > Server Net Address: 192.168.67.0 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > WARNING:  not registered in DNS, using dummy IP value 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca() ] 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > cl_open_device: opening device /dev/mvdapl8cd30a0 
> > > cl_open_dev: error opening /dev/mvdapl8cd30a0 (No such file or 
> directory) 
> > > --> DsMI: Init MRDB failed = 0x1 
> > > DT_cs_Client: IA IbalHca0 opened 
> > > mlnx_pre_allocate_pd() [ 
> > > mlnx_pre_allocate_pd(): umv_buf->input_size 20, pd_ul_res_sz 16 
> > > mlnx_pre_allocate_pd() ] 
> > > mlnx_post_allocate_pd() [ 
> > > mlnx_post_allocate_pd() ] 
> > > mlnx_pre_create_cq() [ 
> > > mlnx_pre_create_cq(): The created cq_size 15 different than *p_size 8 

> > > mlnx_pre_create_cq() ] 
> > > mlnx_post_create_cq() [ 
> > > mlnx_post_create_cq(): Newly created CQ cq_idx 0x88 
> > > mlnx_post_create_cq() ] 
> > > mlnx_enable_cq_notify() [ 
> > > mlnx_enable_cq_notify() ] 
> > > mlnx_pre_create_cq() [ 
> > > mlnx_pre_create_cq(): The created cq_size 15 different than *p_size 8 

> > > mlnx_pre_create_cq() ] 
> > > mlnx_post_create_cq() [ 
> > > mlnx_post_create_cq(): Newly created CQ cq_idx 0x8a 
> > > mlnx_post_create_cq() ] 
> > > mlnx_enable_cq_notify() [ 
> > > mlnx_enable_cq_notify() ] 
> > > mlnx_pre_create_qp() [ 
> > > mlnx_pre_create_qp() ] 
> > > mlnx_post_create_qp() [ 
> > > mlnx_post_create_qp(): Newly created QP qp_idx 0x10019 
> > > mlnx_post_create_qp() ] 
> > > mlnx_pre_modify_qp() [ 
> > > mlnx_pre_modify_qp() ] 
> > > mlnx_post_modify_qp() [ 
> > > mlnx_post_modify_qp(): Committed to modify QP to state 1 
> > > mlnx_post_modify_qp() ] 
> > > DT_cs_Client: EP created 
> > > mlnx_pre_query_ca() [ 
> > > mlnx_pre_query_ca(): priv_op = 0 
> > > mlnx_pre_query_ca() ] 
> > > mlnx_post_query_ca() [ 
> > > mlnx_post_query_ca(): got ul resource size 48 
> > > mlnx_post_query_ca() ] 
> > > *****  DAPL  Characteristics  ***** 
> > > Provider: IbalHca0  Version 1.0  DAPL 1.1 
> > > Adapter: InfiniHost (Tavor) by Mellanox Technolgy Inc. Version 
> 23108.161 
> > > Supporting: 
> > >         65512 EPs with 65535 DTOs and 4 RDMA/RDs each 
> > >         16256 EVDs of up to 131071 entries  (default S/R size is 
> 16/16) 
> > >         IOVs of up to 60 elements 
> > >         131056 LMRs (and 262128 RMRs) of up to 0xffffffffffffffff 
> bytes 
> > >         Maximum MTU 0x80000000 bytes, RDMA 0x80000000 bytes 
> > >         Maximum Private data size 92 bytes 
> > >         Local IP address 4.3.2.1 
> > > ***** ***** ***** ***** ***** ***** 
> > > DT_cs_Client: Posting 1 recv buffer 
> > > mlnx_post_recv() [ 
> > > mlnx_post_recv() ] 
> > > DT_cs_Client: Connect Endpoint 
> > > al:query_req_cb() !ERROR!: query failed: IB_REMOTE_ERROR 
> > > --> DiISQC: SA query callback failed status IB_REMOTE_ERROR 
> > > --> DsINMG: query SA found no record 
> > > --> DsIC: fail to map remote_ia_addr (sa_family 2) to gid 
> > > DT_cs_Client: Cannot connect Endpoint DAT_INVALID_PARAMETER 
> > > DT_cs_Client: Cleaning Up ... 
> > > DT_cs_Client: dat_ep_disconnect (abrupt) error: DAT_INVALID_STATE 
> > > mlnx_poll_cq() [ 
> > > mlnx_poll_cq() ] 
> > > mlnx_pre_modify_qp() [ 
> > > mlnx_pre_modify_qp() ] 
> > > mlnx_post_modify_qp() [ 
> > > mlnx_post_modify_qp(): Committed to modify QP to state 0 
> > > mlnx_post_modify_qp() ] 
> > > mlnx_pre_destroy_qp() [ 
> > > mlnx_pre_destroy_qp() ] 
> > > mlnx_post_destroy_qp() [ 
> > > mlnx_post_destroy_qp() ] 
> > > mlnx_pre_destroy_cq() [ 
> > > mlnx_pre_destroy_cq() ] 
> > > mlnx_post_destroy_cq() [ 
> > > mlnx_post_destroy_cq() ] 
> > > mlnx_pre_destroy_cq() [ 
> > > mlnx_pre_destroy_cq() ] 
> > > mlnx_post_destroy_cq() [ 
> > > mlnx_post_destroy_cq() ] 
> > > mlnx_pre_deallocate_pd() [ 
> > > mlnx_pre_deallocate_pd() ] 
> > > mlnx_post_deallocate_pd() [ 
> > > mlnx_post_deallocate_pd() ] 
> > > DT_cs_Client: IA IbalHca0 closed 
> > > DT_cs_Client: ========== End of Work -- Client Exiting 
> > > mlnx_pre_close_ca() [ 
> > > mlnx_pre_close_ca() ] 
> > > mlnx_post_close_ca() [ 
> > > mlnx_post_close_ca(): PRE block 
> > > mlnx_post_close_ca(): comm 27905 buf_size 48 
> > > mlnx_post_close_ca(): POST block 
> > > mlnx_post_close_ca() ] 
> > > al:sync_destroy_obj() !ERROR!: Error waiting for references to be 
> > > released. 
> > >  Forcing shutdown now.  Ref_cnt = 1 
> > > al:sync_destroy_obj() !ERROR!: 0x8077200(AL_OBJ_TYPE_H_AL) 
> > > dapltest: al_common.c:504: async_destroy_cb: Assertion 
> `!p_obj->ref_cnt' 
> > > failed. 
> > > ./bw.sh: line 22:  2392 Aborted                 ./dapltest -T P -d -i 

> 1024 
> > > -s ${host} -D ${device} -p 16 -m p RW ${size} 1 
> > > 
> > > i am a baby in iba.please tell me the detail,thanks. 
> > > wangjue

_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer:   http://explorer.msn.com/lccn  


-- 
To unsubscribe send an email with subject unsubscribe to openib-general at openib.org.
Please contact moderator at openib.org for questions.

• Previous message: [openib-general] Codebase: when's a good time to branch
• Next message: [openib-general] Using TopSpin CM in a VAPI application
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]